DER (corrosion inhibitor) of DUROSTICK and seal the newly formed holes using D-55, DUROFIX, D-11 SUPER FAST or DS-247 of DUROSTICK. Continue by thoroughly cleaning all surfaces from loose materials, formwork oils and salts using the biodegradable cleaner BIOCLEAN INDUSTRIAL. Rinse thoroughly with plenty of water. Application: D-1 applies to meticulously soaked surfaces in 2-4 equal thickness crosswise coats of 1mm thick each one using an emulsion or a round chalk brush or a roller for emulsion paints or even metal trowels. Empty the product in a clean container with cool water, at a mixing ratio of 25kg powder to 6.0-6.5lt water (1.2-1.3lt for 5kg). It is recommended to mix using a low-rpm drill equipped with the appropriate attachment, until a lump free, homogeneous mass is obtained. The mixture has to be thick enough so it does not drip from an emulsion brush or roller. The mixture remains workable for 60 minutes and each additional coat approximately 2 hours after of the previous one, and while the previous one is still fresh. In case the product remains on the surface longer than 2 hours, resoak the surface. Protect the finish surface for the next 24-48 hours from high temperatures, rain and frost. NOTES • If the substrates to be coated with DUROSTICK D-1 have hairline cracks or there is a need to protect them from natural or other types of vibrations (digging equipment working in adjacent locations), use an acrylic additive. Add the acrylic emulsion D-20 of DUROSTICK in the mixing water at a ratio of one-part water to one-part D-20, up to two parts water to every one-part D-20. Alternatively, use 5 parts water to one-part DUROMAX to ultimately increase the flexibility of the product, the surface resistance to abrasions, its adhesion and waterproofing as well. • D-1 should not be mixed with more water than specified. of water in 25kg mortar • Application temperature: From +5°C up to +35°C • Temperature resistance: From -30°C up to +90°C • Pot life: 1 hour • Application thickness: 1mm/coat • Foot traffic: After 3 hours • Backfilling: After 3 days • Water tightness per DIN 1048* Under water pressure of up to 7 Atm (kg/cm²). floors, basements & roofs
RkJQdWJsaXNoZXIy MTk0OTg2