| Select:

  • Ελληνικά
  • English
  • Shqip
  • Pусский
header-banner
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

MS-POLYMER MARINE

Flexible sealant suitable for wooden decks in shipbuilding

MS-POLYMER MARINE

MS-POLYMER MARINE

TECHNICAL SPECIFICATIONS

Base

MS-POLYMER, silane modified

Form – Color

Paste - Black

Application temperature

From +5C to +40C

Temperature resistance

From-40C to +120C

a. Non – polymerized material:

 

1. Thixotropy

freestanding (does not sag)

2. Skin formation time

15-20 minutes

3. Polymerization  rate 2-3mm/day

b. Polymerized material:

 

1. Shore-A hardness

38±2 per DIN 53505

2. Modulus of elasticity at 160% stretch for 24h

>95%

3. Elongation at break

>350% per DIN 53504

4. Tensile strength

2,3 Ν/mm2 per DIN 53504

PROPERTIES

Black flexible adhesive sealant with proven resistance to sea water and UV radiation. The hybrid technology of the polymer modified, silane based MS-Polymer sealant covers a multitude of application needs for waterproofing as well as sealing. Key features include high mechanical strengths, and unbreakable bonding. It is unaffected from prolonged sun and salts exposure. On curing, the product can be sanded, and it does not discolor.

APPLICATIONS

MS-POLYMER MARINE is suitable for sealing joints on the wooden decks of yachts and ships. It is recommended for sealing wooden floor joints in houses, both indoor and out, especially in saunas, swimming pools, fitness centers etc.

ADVANTAGES



• High resistance to sea water.
•Solvent free product.
•Resistant to temperature variations from -40°C to +120°C.
• Applications on stable surfaces do not require any priming.
• A high thixotropy material; it does not sag.

 

USE

1. Surface preparation
The edges of the joints must be dry, clean and free from dust, grease and loose materials. The minimum width of the joint must be no less than 5mm. For joints greater than 12mm, the joint depth should be half its width. For joints less than 12mm, the joint depth should be equal to its width.

2. Application
It is recommended to apply MS-POLYMER MARINE, in cartridge form, using the DUROSTICK Professional Cartridge Gun, or use  its ‘sausage’ form, together with the DUROSTICK DUROSEAL 600, the Professional Cartridge and ‘Sausage’ Barrel Gun. Cut the nozzle on a slant and fill the joint tilting the cartridge at a 45° angle in relation to the joint, making sure that air is not trapped under the sealant. Remove the excess material with a flexible putty knife. Shape and finish the material before any (surface) skin formation.

 

CONSUMPTION

 

Indicatively a cartridge will cover

JOINT

LINEAR METERS

4x6mm

12,9

6x6mm

8,6

8x6mm

6,4

12x8mm

3,2

 

NOTE

 

On complete curing, the product is harmless to health.

 

STORAGE

 

Store in dry places, for 12 months from production date

PACKAGING

Carton box with 12 cartridges of 300ml each one
Carton box with 15 ‘sausage’ tubes of 600ml each one

 

CLEANING

 

Clean the still fresh product, using DUROSTICK THINNER 101. When the product cures, it becomes hard to clean and it can be removed only by mechanical means.