| Select:

  • Ελληνικά
  • English
  • Shqip
  • Pусский
header-banner
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

NANO PROOF CERAMIC DS-270

Water repelling agent for plaster, concrete clay and stone surfaces

NANO PROOF CERAMIC DS-270

NANO PROOF CERAMIC DS-270

TECHNICAL SPECIFICATIONS

Form - Color

Polymer dispersion - White, becomes
transparent when dry

Density

1.05±0.05kg/lt

Application temperature

5°C to 35°C

pH

7,0 ± 1,0

Duration of waterproofing

3 years (exterior waterproofing)
6 years (interior waterproofing)
Up to 12 years on very absorbent surfaces, on two coat applications
Water absorption coefficient W≤0,5 kg/m²√h

Odorless, environment friendly

V.O.C. (Volatile Organic Compounds): Limit value of maximum content of VOC per EU (Directive 2004/42 / EC) for this product (category A/c: ‘Coatings for exterior walls of mineral substrate, type WB): 40 gr/lt (2010). The ready to use product contains maximum 20 gr/lt VOC.

THE PRODUCT WAS TESTED IN ACCORDANCE WITH THE INTERNATIONAL STANDARDS OF CERTIFICATION:
ISO EN 539-1: WATER PERMIABILITY TEST / ASTM E514: RESISTANCE TO WATER PENETRATION
ISO EN 10545-7: RESISTANCE TO ABRASION / ISO EN 10545-14: RESISTANCE IN STAINING

 

PROPERTIES



Waterborne nanomolar technology product. Exceptional for the waterproofing of mineral substrates on vertical and horizontal surfaces, both indoors and out.
It permeates deep into the surfaces due to the high penetrating action of the nanoparticles in its composition.The process gives (imparts) hydrophobic properties in the mass of the substrate, without preventing its transpiration.
It does not create any surface film and covers microcracks. It does not favor the growth of fungi and mold, as well as the creation of salt stains.
It contributes into maintaining the aesthetic perfection and integrity of the surfaces  it is applied on. It does not shine or affect the natural beauty and texture of any surfaces. Provides long lasting protection, and facilitates regular cleaning from mud rain and air pollutants. It also protects from soot and nicotine since it does not allow for any penetrations through the surface pores. It is odorless, user and environment friendly.


A nanomole technology product, water based, suitable for waterproofing vertical and horizontal surface on exterior and interior spaces. Recommended for application on porous substrates such as roof tiles, 'cotto' absorbent tiles, concrete, plaster, plaster board, natural stone as well as clay and ceramic materials and articles. Provides deep adhesion in the surface pores and enhances them with hydrophobic properties without inhibiting transpiration. Prevents the occurrence of minor capillary cracks, the development of fungi and mould and the development of salts. Odourless, user and environment friendly.
Consumption: 1 lt / 8-11m2, depending on surface absorption.
Cost of application: 0.85 - 1.13 € / m2 depending on surface absorption.

APPLICATIONS



NANO PROOF CERAMIC DS-270 penetrates deeply and waterproofs porous substrates. Substrates such as absorbent cotto type bricks, concrete and plaster, as well as drywall and natural stones. It also does so for clay and ceramic materials and clay roofing tiles. Such materials are fully waterproofed and protected from frost related cracks, black spots, lichen and mold.
On applications of two consecutive, ‘wet on wet’ coats, it will provide complete waterproofing and protection for 12 years.
 

 

USE

 

1. Surface preparation
Surfaces must be clean, dry and free of dust, salts, grease and any loose materials.

2. Application
 Apply in one coat until saturation, using a brush, a roller or an airless spray gun. When dealing with very absorbent surfaces, apply a second coat while the first one is still wet. The product is ready for use as is. Stir well before use but do not dilute. Touch dry in about 15 minutes. It dries in about an hour, depending on ambient conditions (temperature - humidity).



NANOTECHNOLOGY



A nanometer (nm) is one billionth (10 -9) of a meter. Nanotechnology is the study of the control of matter at the atomic and molecular level. Generally speaking, ‘Nanotechnology’ is concerned with structure sizes of 100 nanometers or smaller in at least one dimension, and also involves developing materials or devices of this magnitude. And to better understand all the above with an example: a human hair has a diameter of 50,000 nanometers.

 

CLEANING



Clean tools immediately after use with water and if necessary with soap or detergent solution.

CONSUMPTION

 

1lt/8-11m², depending on the absorbency of the surface.


STORAGE



Store in cool places, protected from frost for at least 24 months from production date.

SAFETY DIRECTIONS



The product needs no hazard labeling under current European and national legislation. However, it is recommended to keep away from reach of children. If swallowed, seek medical advice and show the container or label.

NOTES



• The complete waterproofing of the surfaces will be achieved 24 hours after application.
• The product, after drying, is harmless to health and the environment.

PACKAGING



Carton box with 15 pcs. of 750ml each one
Carton box with 6 pcs. of 3.5lt each one
18lt container