| Select:

  • Ελληνικά
  • English
  • Shqip
  • Pусский
header-banner
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

DUROSTICK DS-POLYMER

Multi-purpose elastomeric sealant and adhesive

DUROSTICK DS-POLYMER

DUROSTICK DS-POLYMER

TECHNICAL SPECIFICATIONS

Base

Acrylic polymer

Color

32 colors based on the color chart

Density

1.30±0.05kg/lt

Skin formation time

Approximately 20 minutes

Drying time

1-2 hours (touch dry)

Curing time

One-three days, depending on the depth of the joint and the humidity

Application temperature

From +5°C to +40°C

Temperature resistance

From –30 oC to +100 oC

Tensile strength

2 Ν/mm² per DIN 53504

Elongation at break

Approx. 300% per DIN 53504

 

PROPERTIES


Advanced technology elastomeric sealant and adhesive. It is solvent free and odorless, available in 32 selected colors, matcing the DUROSTICK cementitious grout colors. It provides high adhesive strength and flexibility, with resistance to UV radiation and moisture as well as to acidic and alkaline environments.
Mold and mildew resistant, non yellowing and non flammable. It retains its original flexibility over time and adheres perfectly to porous surfaces without priming.

APPLICATIONS

DUROSTICK DS-POLYMER is suitable for a multitude of applications, both indoors and out.

• Sanitary fixtures: Seal all bathtub, sink, toilet and bathroom accessories joints. Fill the skirting joints between floor and walls (pic.3).
• Kitchen furnishings: It seals kitchen countertops and sinks.
• Electrical projects: It secures metal and plastic cable conduits, splice boxes and panels (pic.1).
• Aluminum frames: Perimeter waterproofing and securing of aluminum (pic.2), wood, and PVC frames.
• Mirrors: It mounts silver plated mirrors (depending on the weight and substrate).
• Construction projects: Reinstalling and sealing of all kinds of marble and stone. It is suitable for flexible joint sealing of drywall panels and cement boards, as well as concrete, plaster and polycarbonate panels.

 

USE

1. Surface preparation
The substrate must be sound, clean, dry and free of grease and dust. Unstable parts of the grout should be removed with a putty knife.
2. Application
Insert the cartridge into the DUROSTICK PROFESSIONAL GRADE CARTRIDGE GUN.  Cut the nozzle on a slant and fill the joint gradually, by tilting the gun at a 45° angle in relation to the joint, making sure that air is not trapped under the sealant.
It is recommended that the depth of the joint should be equal to half its width. Adjust the depth using DUROSTICK DS-265 backer rod, where deemed necessary. Use masking tape to properly contain the sealant, and remove after the application. Wet your finger  with water and smooth the sealant within 20 minutes from the completion of the application. Remove all residue with a damp sponge.

LIMITATIONS OF USE


One of the two adhering surfaces must be porous. It is not suitable for bonding and/or sealing polyethylene (PE), and polypropylene (PP), teflon, as well as fishtanks and aquariums.

CONSUMPTION

Indicatively a cartridge will fill:

JOINT (mm)

LINEAR METERS

4x6mm

12.9

6 x 6 mm

8.6

8 x 6 mm

6.4

12 x 8 mm

3.2

16 x 10 mm

1.9

20 x 12 mm

1.3

 

 

 

 

 

 

 

 

 

 

.

STORAGE


Store in places protected from frost for up to 18 months after production date.

SAFETY DIRECTIONS


This product, based on current European and national legislation, does not require any hazardous material label. It is however recommended to keep out of reach of children. If swallowed, seek medical advice immediately and show the container or label.

PACKAGING

Carton box with 6 cartridges of 261ml (340gr) each one.