| Select:

  • Ελληνικά
  • English
  • Shqip
  • Pусский
header-banner
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

DUROWOOD DS-POLYMER

Elastomeric sealant and adhesive for wooden surfaces

DUROWOOD DS-POLYMER

DUROWOOD DS-POLYMER

TECHNICAL SPECIFICATIONS

Base

Acrylic polymer

Color

10 colors based on the color chart

Density

1.30±0.05kg/lt

Skin formation time

Approximately 20 minutes

Drying time

1-2 hours(touch dry)

Curing time

One-three days, depending on the depth of the joint and the humidity

Application temperature

From +5 oC to +40 oC

Temperature resistance

From -30 °C to +100 °C

Tensile strength

2 Ν/mm² per DIN 53504

Elongation at break

Approximately 300% per DIN 53504

PROPERTIES


Advanced technology, solvent free elastomeric sealant and adhesive.
Available in 10 selected wood colors, with the ability to be painted with water or solvent based varnish, immediately after drying.
Adheres to any type of wood without priming, creating a seamless and flexible seal.
It remains unaffected by moisture and does not discolor over time.

APPLICATIONS


DUROWOOD DS-POLYMER is suitable for filling wooden skirting and wooden floor joints. It ensures the sealing of wood floors, because its high flexibility protects from the resulting tensile forces naturally occurring to wood. It seals the joints between floor boards resulting from time related wear. It also seals the joints occurring from the installation of dissimilar materials, such as marble and stone, as well as ceramic tiles with wood (pic.7) etc. Ideal for installing wood moldings around doors and windows as well as ceilings, therefore avoiding nailing.

USE

1. Surface preparation
The substrate must be sound, clean, dry and free of grease and dust. Unstable parts of the grout should be removed with a putty knife.

2. Application
Insert the cartridge into the DUROSTICK PROFESSIONAL GRADE CARTRIDGE GUN. Cut the nozzle on a slant and fill the joint gradually, by tilting the gun at a 45° angle in relation to the joint, making sure that air is not trapped under the sealant.
It is recommended that the depth of the joint should be equal to half its width. Adjust the depth using DUROSTICK DS-265 backer rod, where deemed necessary.
Use masking tape to properly contain the sealant, and remove after the application. Wet your finger  with water and smooth the sealant within 20 minutes from the completion of the application. Remove all residue with a damp sponge.

CONSUMPTION


Indicatively a cartridge will fill:

 

JOINT

 

LINEAR METERS

4 x 6 mm

12.9

6 x 6 mm

8.6

8 x 6 mm

6.4

12 x 8 mm

3.2

16 x 10 mm

1.9

20 x 12 mm

1.3


STORAGE

Store in places protected from frost for up to 18 months after  production date.

SAFETY DIRECTIONS

This product, based on current European and national legislation, does not require any hazardous material label. It is however recommended to keep out of reach of children. If swallowed, seek medical advice immediately and show the container or label.

PACKAGING

Carton box with 6 cartridges of 261ml (340gr) each one