| Select:

  • Ελληνικά
  • English
  • Shqip
  • Pусский
header-banner
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

DUROSEAL 600

Professional cartridge and ‘sausage’ barrel gun

DUROSEAL 600

DUROSEAL 600

PROPERTIES



Professional gun from heavy duty aluminum, for easy sealant applications. It features a heavy duty spring loaded trigger and mechanical assist. It accepts sealants in both cartridge or ‘sausage’ forms, making it the most suitable tool for dozens of applications.

APPLICATIONS



Acrylic and elastomeric caulking as well as polyurethane mastics in ‘sausage’ form must necessarily be applied using DUROSEAL 600. Fill and seal construction expansion joints and joints in metal using this adaptable gun. Aluminum and wood frames as well as shipbuilding applications cost less when using the versatile gun, DUROSEAL 600.

USE

A) ‘Sausage’: Unscrew the front cap, pull the piston back and insert the ‘sausage’. Place the nozzle on the front cap, and screw it until a ‘click’ sound is heard.
Use a razor blade or a knife to cut the nozzle on a slant. Cut the nozzle to the appropriate point that will yield the desired thickness of the sealer.
B) Cartridges: Remove from the piston the plastic disc by removing the threaded nut. Replace the nut to the piston and use the gun with a metal round, smaller diameter plate that fits into the bottom of the cartridge.
C) Cementitious: Unscrew the front cap, dip the gun into a bucket with clean water, pulling the piston up and down, at least two times to wet the inside. Then, use a flexible container to fill the barrel of DUROSEAL 600 with the desired cementitious product (as much as needed to work for 30 minutes). Cut the nozzle on a slant, to the appropriate point that will yield the desired thickness of the sealer. Screw the front cap together with the nozzle.
After the application, clean the gun thoroughly with water. REPLACEMENT NOZZLES are available by DUROSTICK, for various applications.

NOTES



For epoxy resins, epoxy putties, glue in pasty forms and generally any material that would be hard to remove from the gun, use the BLANK CARTRIDGE of DUROSTICK. The cartridge is fully compatible with the versatile gun, DUROSEAL 600.

PACKAGING



Carton box with 10 pcs.